Descripción de PIC 12F675 Oscilloscope:
A PIC based micro oscilloscope. Original information on this project can be found at: http://www.dos4ever.com/uscope/uscope_e.html I used the laser printer toner transfer method of PCB fabrication. I mounted all of my components vertically on the board to minimize space requirements. I made a few small changes to the circuit, the main one being to accommodate using an oscillator instead of a simple crystal; I was unable to find a 27MHz crystal locally. This is a great little project that will yield a useful tool for your bench. The total cost of components is under $10. The only downside aside from the low sampling rate is the fact that even when overclocked to 27MHz, the PIC is unable to generate an NTSC signal. As such, you will need to have a TV capable of displaying a PAL signal to make use of this device.
Boulderdash clone on pic 12f675 with Nokia 3310 LCD
00:15 Mins | Visto 32126 veces
EEVblog #13 Part 1 of 2 - Digital storage Oscilloscope Tutorial
09:46 Mins | Visto 36256 veces
PIC12F675 current and voltage meter shot with canon 600D
00:41 Mins | Visto 377 veces
Tutorial de Electrónica Básica 14: Osciloscopio (Parte 2)
09:51 Mins | Visto 90359 veces
Oscilloscope Tutorial Part 1 - Choosing an oscilloscope
03:32 Mins | Visto 188300 veces
EEVblog #85 - High Voltage Oscilloscope Probe Design
04:51 Mins | Visto 15452 veces
Curso Virtual de microcontroladores PIC Part.3
10:35 Mins | Visto 122198 veces
Mini Osciloscopio com PIC - Mini Scope with PIC 18F4520
00:50 Mins | Visto 85738 veces